"Preserving Life One Person at a Time"

Toll Free 877-964-5463

Thermo DataRAM 4

 The DataRAM 4 is a portable particle sizing monitor / data logger and dual-length Nephelometer. With the DataRAM 4 you'll never have to wait for laboratory results to assess whether airborne pollutants have reached dangerous levels. The DataRAM 4 real-time aerosol monitor measures mass concentrations of airborne dust, smoke, mist, hazes, and fumes. All while providing continuous real-time readouts. The instrument can be used for exposure sampling of ambient air. Continuous, unattended monitoring of indoor, duct, or process air, as well as environmental and perimeter monitoring is also possible.

Ultra-RAE Monitors

    The Ultra-RAE blends the accuracy of RAE Systems’ supremely crafted Photo-Ionization Detectors (PIDs) with the specificity of REA-Separation tubes to create a highly accurate compound specific instrument.  This specialized instrument comes standard with the ability to data-log and operate up to 12 hours on rechargeable Nickel-metal Hydride (NiMH) Batteries.

 Multi-RAE Portable Organic Vapor Meter

 The Multi-RAE Plus is an extremely flexible monitor configurable as a diffusion or pumped instrument, with a variety of sensors and with alkaline or rechargeable batteries.  The Multi-RAE is the only instrument available on the market today that can offer protection using both portable organic vapor to standard gas detection sensors and an integrated Photo-Ionization Detector (PID).

 Jerome Mercury Vapor Analyzer

             The model 431-X is a portable, hand-held unit that can detect and measure toxic mercury vapor levels in just seconds with just the push of a button.  The 431-X uses a fold film sensor to monitor mercury vapor in a range from 0.001 to 0.999 mg/m3Hg.  The gold film sensor is inherently stable and selective to mercury, eliminating interferences common to ultraviolet analyzers such as water vapor and hydrocarbons.  When the sample cycle is activated, the internal pump in the 431-X draws a precise volume of air over the gold film sensor. The instrument computes the concentration of mercury in mg/m3 or Ng and displays the final result on the LCD readout.  The Jerome Meter is useful in mercury spill clean-ups as it may easily be carried to locations of concerns to detect mercury sources, and after clean up the 431-X can be used to verify that no hazardous residue remains.

 MSA Passport PID II Organic Vapor Monitor

    The MSA Passport PID II organic vapor monitor is a convenient, portable instrument for detecting low concentrations of volatile organic compounds (VOC’s).  The Passport PID II monitors compact design supports a variety of monitoring applications.

 Multi-Gas Detector

             The Multi-Gas Detection System can be used with short-term detector tubes.  The Detector uses a proven bellows design to ensure and even stroke and accurate, repeatable results.  Its contoured shape fits the user’s hands and squeezes easily for one-handed operation.  A built-in automatic stroke counter records the exact number of strokes taken.  An easy to read end of stroke indicator prevents false measurements.  The pump draws 100 cubic centimeters of sample air per pump stroke. 

            The battery driven, electronically controlled instrument can perform a pre-programmed number of strokes.  This simplifies both frequently taken short-term measurements and those requiring large sample volumes.  An LCD display indicates number of strokes taken as well as a low battery condition.

 Horiba U-10 Water Quality Monitor

             Horiba’s Model U-10 Water Quality Checker brings laboratory accuracy and the ease of push-button operation to water quality measurement in the field.  Six parameters can be measured: pH, Temperature, Dissolved Oxygen, Electrolytic Conductivity, Turbidity and Salinity.  The sensor measures by being directly submersed in the water, eliminating the need to collect samples.

 Air Velocity & Temperature Meter

             The laser verified portable air velocity meter delivers extremely reliable measurements with a velocity range of 30 to 9999 fpms.  Each meter is calibrated in a system using Laser Doppler Velocimetry, the same technology used by NIST.  Even with its accuracy, this meter is easy to operate.  One touch of the velocity or temperature button provides the desired reading.  It can average up to 255 velocity and temperature readings.  When measuring fluctuating flows, it can be set to display steady, time averaged numbers.

            The RS-232 port easily transfers information to a data analysis machine for printouts and manipulation.

 Sound Level Meters

 The compact sound level meter is specifically designed to meet the sound survey needs of industrial hygienists and safety professionals.  It is lightweight and easy to use.  This unit uses a large digital display with a full 0.1-dB resolution to guarantee precise readings.  The sound level meter reads in both “A” and “C” frequency weightings to simplify selection of hearing protectors.  Two measurement ranges, both covering 70-dB range, deliver a 30 to 135 dBA range.  Since a socket is provided to supply both AC and DC outputs, the meter can be used with other measuring systems including chart recorders and tape recorders.

            The sound survey meter is a simplified version of the sound level meter, yet maintains much of its specifications.  This meter is an easy-to-use survey instrument to check whether industrial exposure areas require more detailed investigation.

Q-300 Noise Dosimeter

The Q-300 Noise Dosimeter is a highly versatile, multi-function data-logging noise dosimeter.  It performs a wide variety of acoustical measurements for applications such as workplace evaluations, personal exposures, compliance assessments and environmental analysis.  Its tough package makes it ideal for industrial, military, mining and enforcement use.  RFI shielding and intrinsically safe design means the Q-300 can go where you need it to go.

 Dust Monitor

             The laser dust monitor utilizes light scattering detection with a low power laser beam to monitor airborne concentrations of dust.  Two readouts provide a real time concentration (analog) and cumulative concentration (LCD) in counts per minute, a value that will relate to a specific dust type through a correction factor.  Designed for maximum response for particle sizes between 0.1 and 10 microns the standard unit has a range of 0.01 to 10 mg/M3.  It operates on disposable AA batteries with an optional rechargeable NiCad battery pack available.

 Quest Heat Stress Monitor

 The Quest Heat Stress Monitor computes to WBGT index in either degrees Celsius or Fahrenheit.  The WBGT index is the industry standard method for determining the level of heat stress of an individual within a given environment.  A large LCD indicates indoor and outdoor WBGT index as well as ambient temperature, natural wet bulb temperature, and glove temperature.  The unit has the capability of data storage and output to a serial parallel printer.